Coolit Systems Eco CPU Water Cooling System AUTO-REGULATED & Maintenance Free LGA1366/1156/775/AM3

Comment:
-works perfect for what you need it for

Comment:
CoolIt ECO A.L.C. Model No. ECO-R120. S/N:1010000198The leak occurred in the swiveled connection. Also had a CoolIt Domino A.L.C. Model NO:DM-100. S/N:2309000339 that had a leak in the cpu block. It came stock in an AlienWare computer and run flawlessly continuously for about 6 years. This one had no swivel connections and honestly it did its job very well and I would recommended it. had to use "Satisfactory" because website would not let me enter "Completely Unsatisfactory" without an OrderID

Comment:
easy to install and keeps cpu on a good average low temp.would buy that again!

Comment:
Aucun entretien, silencieux, abordable et très facile d'installation. Je l'ai installé dans un boîtier ANTEC 300 (sku:29812) et sur ma carte mère Z68XP-UD4 (sku:62197)

Comment:
Overall, this is a very good liquid cooler! I recommend that you install a second fan for a push pull configuration as you will notice additional temperature drop.You will need 6/32 x 1/8 inch long screws for additional fans!

Comment:
This is my first liquid cooler. Great entry-level liquid cooler. The fact that it's zero maintenance is a huge thing for me as I don't have time to open my case up too much. Keeps the temp on my cpu low even when playing games for extended periods. Pricing is just right as well. I just wish they included screws for an additional fan on the radiator.

Comment:
Great cooler for a great price. Would buy again, hoping that it will not leak, like some situations I've heard on the internet. But don't let that discourage you from buying...the fail rate is probably the same as a hard drive...0.01-0.02%

Comment:
this is a great cooling product i have it running on my intel i7-970 and i have the evga x58 sli3 motherboard and the tunning utility that comes with it tells me that the cpu idles at 19C and when im playing games it gets up to like 32C max. i love this so much i put it in my uncles new AMD quad core and my dads new intel quad core and ill never look back

Comment:
my q6700 idles in the 30s and barely touches 40 while loaded.

Comment:
Overall Im satisfied with the cooler, it keeps temp down, and its pretty quiet.Installation was pretty easy.Currently installed on an i5-2500k and it keeps it to room temperature on idle, and goes up to 60C at full load until the fan really kicks in, and that it goes back to around 55C and stays there for hours while using Prime. So there is still headroom for a lot of overclocking.Got it in special and its worth the 45$

Comment:
Easy Installing. Great Cooling. Great Price.

Comment:
Keeps my new rig fresh and cold! It's a must have if you want to OC your CPU!

Comment:
second time i bought this unit i got no problem at all but for the price the corsair still better choice five almost the same temperature

Comment:
Its good. for low CPU use it stays damn quiet, but if you do CPU intensive activities the noise can really crank up as the cooling fan on the Rad gets going.

Comment:
Simple Install and was perfect for some of our business machines that are in high temp areas.Also if the rebate here is no longer available check the manuf. website they often offer mail-ins as well.

Comment:
Keeps my i5 2500k below 55 deg Celsius while overclocked to 4.2 ghz with no change in voltage. Great cooling system.

Comment:
Handles i7 2600k over clocked at 5.0 very well. Highly recommended

Comment:
i price match this item and it was a steal deal. it so quiet keep my temps really low. nice looking inside my cooler master casing. highly recommended you cant go wrong..

Comment:
Ran well for about 6 months, then one day decided to leak coolant everywhere. CPU temperature sky-rocketed and motherboard did a thermal shut down. Came home from work to a puddle of mess and the smell of burning electronics.

Comment:
I've had this CPU cooler for a month now and I'm very satisfied with it. It keeps my CPU at around 50c when under full load.

Comment:
Took a stab in the dark at one of these new little water cooling solutions, and was blown away at the performance and how easy it was to set up. Be careful to not bend any of the rad fins when installing (Having a push/pull set up solves this problem.) but a protective grill that you could attach if you don't want to put on or have the room for a second fan would be key.Very impressed, im sold on these puppies now. Keeping my 4.5ghz 2500k at 60C on load (25-30C ambient).

Comment:
overall performance is pretty good.On quiet mode, 2600k i7 idles around 35COn performance mode, idles around 32C and max load at 43CCan be pretty loud at max RPM, but that pretty much applies to all other coolers.

Comment:
I originally got this cooler for an AMD system but never managed to screw it into my motherboard backplate. Either the included screws are too short or the threads are wrong. Coolit should include AMD backplates in my opinion. Later on, I mounted this cooler into an Intel system and the noise and cooling performance is pretty acceptable. So I guess this is a recommended purchase for Intel systems, but if you're with AMD, unless Coolit decides to include AMD backplates, get something else.

Comment:
Using this to overclock my Q6600 to 3.5Ghz. Realtemp report max temp 65 degree at 100% load. Installed in a Antec 900. The plastic holder on the side panel to install the side fan was in the way of the radiator so I had to remove a small piece of plastic be able to close it. Very satisfied with my purchase.

Comment:
I bought this because my CPU was getting close to dangerous temperatures. This cooler brought the temperatures down.