HEC Blitz Black Steel Edition ATX Mid Tower Computer Chassis Gaming Case

Comment:
Comparable to Rosewill Destroyer. Tons of space for upgrades/vid cards. Somewhat flimsy metal, no rubber grommets for hdd cage

Comment:
Fantastic open space, plenty of space to perform. Rigid steel makes the case solid and not contort under pressure. Straightforward access to drive bays. Case only came with only 3 of the four feet attached making it so that i had to remove the 3 feet to get it to sit stable. the USB ports on the front of the case had been bent and i had to tweak them back into shape in order to use them. The overall style of this case is wonderful and i adore it, but unfortunately this case is not for me, its for a customer of mine and having these defects happen puts me into a predicament as i cant wait 2-3 weeks to have this case replaced with a customer waiting. but i require this case to be in NEW condition, not ghetto rigged to appear new. High quality Assurance demands to fire who ever let this case walk off their factory floor.

Comment:
Nicely given that I upgraded my personal computer I have been wanting to upgrade my case and the price tag and attributes of this case pushed me over the edge. Dual 120mm fans with room to expand, e-sata port along with the USB and audio outs on the front panel and bottom mounted psu all hit appropriate exactly where I was looking. Plenty of screws, good mesh covers on the front panel, three.five" adapter and a small heavier/thicker sheet metal than my last case. Very good create quality and style all and all a wonderful little case. Thumbscrews would have been good, I have a few laying around, but with all the black screws they provided me with they must have spent a few extra cents and gone thumb screws. Be wary of your CPU power cable length mine was just barely extended enough to make the reach across the motherboard on my ASUS M489GX board, almost everything else was fine. For the dollars you can't go wrong, I was able to get it for ฮ shipped and in 2 days to boot. Newegg you are remarkable about that. Ordered on Tuesday, recieved on Thursday for no cost. I can't even ship something this size for ฟ-20 let alone get it anywhere in 2 days, so kudos to you.

Comment:
Best quantity of space to operate with. Fans are Really quiet. Good LED fan in front. Almost everything fit snug as it need to. Good and light. none

Comment:
Painted interior is a plus; Light weight; Top shelf for eSATA drive; Decent quantity of interior space; Wire management is OK; Cooling was surprisingly high; Huge front panel buttons with superior back lighting; Most of the steel has its edges rolled (yay, less cut fingers); Entry-level water cooling ports in the rear; Tall case feet (finally, some under-case airflow); Leading eSATA shelf has a good panel for aftermarket meters, LEDs, fan controls...etc; Adequate room for adding UV, neon, or simple LED lighting; HDD mounts can be tricky for newcomers; Clear 120mm is cheaply produced (over-tightening can break its tabs); Tool-much less add-in card holder isn't precisely tool-much less; Top fan array desires rather a bit of plastic removed so the exhaust fans work; Button LEDs can burnout to speedily, but easily replaced. Best filter hinders exhaust fans as do most of the stock grills (remove for far better ventilation and less fan failure rate). Motherboard tray can quickly be produced removable. Bottom grills/filters function much better if attached to the outside. Side grill/window can be removed and plexiglass window added. Small dremel function the supposed tool-less add-in card holder can accommodate a thumbscrew for a correct "tool-much less" design. I recommend obtaining further 120mm fans (picked up three 4-packs myself). Get your self an extra couple sets of thumbscrews for the sides. Best exhaust fan/s can be sacrificed for a water cooling radiator with the fans mounted inside the principal case cage. Adding a 120mm AC fan with a dimmer manage will absolutely move some air by way of the case 鲦cfm), albeit it sounds comparable to a Hawker Harrier at full throttle. The five.25 grills sitting in front of HDD fan can be removed in favor of removable filter door/housing. Overall: four.5 Eggs (-.five Egg due to lack of accurate tool-less design on add-in card holder).

Comment:
Got it for ฮ shipped.. I have an Antec 300 for my other rig and its good roomy case but it just looks boring compared to this case! The energy button is cool and like the small groove on best that you can use to store CDs, USB drive or just whatever you like! Came with two fans! I was in a position to fit my Cooler Master hyper 212 heatsink in there! HDD fan keeps my HDD cool.. Really like the front ESATA and the 2 usb ports in the front. Not as roomy as my antec 300 but that can also be a pro! A con is that airflow and cable management is a b*tch. I at present have 1 dvd drive, 1 tough disk difficult drive rack and 1 tough drive and its genuinely tough to navigate in there! I would stil buy it for the price I got it! Its a sexy searching case! Seriously liking it even with the cable management and little space it has in there..

Comment:
I identified it sturdy and quite good seeking. Love the LED's. If you're getting this, I recommend you acquire 1. silent fans and 2. much better fans. The best fan sounds like a jet's passing by and along with my stock cooler on my phenom it's just.. fairly positive it hits 55-60db.Also, they're all intake fans. Based on how your GPU sits add a couple exhaust ones.

Comment:
The case looks remarkable and the overall really feel is sturdy. It deserves a full five eggs given the cost. I gave it three eggs due to the fact the two fans that had been supposedly included had been nowhere to be located. I'll change this evaluation as soon as I get it sorted out. It's nonetheless a wonderful get!

Comment:
This has to be the finest midtower case I have ever owned ! I was a small unsure of the mesh side panel but it genuinely looks great and does not collect dust. The cooling with the two included 120mm fans appears to do the job properly.I would extremely suggest this case to any person that wants excellent cooling and a contemporary looking case without getting too a lot ! Side panel does not remain on with out screws installed. No thumb screws included, but if function on computers you almost certainly have a bag of them somewhere like I did.Front mesh panel exactly where front fan is mounted collects dust and demands cleaning weekly, and is mounted about 6 inches off the ground on a wood floor. If you are on the fence with this case, just obtain it now, heck purchase 2 if you can afford it !This case looks a lot superior in person and the buttons on the front give a distinct click when pushed that screams excellent.

Comment:
This case has a lot of Ventilation. The entire front is mesh with filters, the side vent combined with the 2 120mm fans is adequate for most makes use of. BUT it also has space for three further 120mm fans giving it sufficient circulation for everyone. The 3.five" mounting points are directly behind the front intake fan, giving your HD cooling. The best fan can simply be moved to blow directly across your CPU Heat sink.Other Pros:-Totally painted interior, all black looks clean.-Front panel pulls off effortlessly adequate to permit cleaning for the filters. Similar with leading panel.-Has punch-out holes for water cooling systems.-Comes with mounting brackets to convert one of the five" bay slots into three.five" (for floppy drives or to mount your difficult drive in the leading bays if your getting trouble with cord lengths)-Rounded edges on everything, no sharp spots.-Price! ื.99 is unbelievable.Really the finest case I've ever purchased in this cost range. Construction is sturdy for the case, the side panels are a bit thin The two fans included are 3 pin connectors, make confident your motherboard has at least 3 spots for fan connectors (Two from case, 1 for your Heat sink) Not really a con because you can generally obtain a 3pin-ɰpin adapter. Just make sure you get Molex fans to add to case.Theres no documentation. They send a smaller schematic showing the case with every part labeled, but it's hard to see the parts and the labels don't tell really much. Nevertheless it's simple sufficient to figure out where almost everything goes. The only extras they send are a three.five" drive front panel, the 5"-ɯ.five" drive bay brackets and a corner bracket that mounts to the bottom of the case to support hold the power supply. You have to turn the case on it's side to mount it, but once again... no major deal.Also had to drill a couple of holes to zip tie my cables to. Not truly a massive deal but if you're a neat freak and wanted 1000 areas to mount cables, your out of luck. There are a few, just not constantly exactly where I wanted them. The only cause I've deducted an egg is mainly because you will certainly find a much better case if you get into the higher cost ranges. But I'm significant that this case is by far the ideal I've seen for under โ. Possibly even below ๠. Good for spending budget builds, or individuals like me... You know, with kids a wife and life to worry about.

Comment:
Price, Appear, Size. None Almost everything installed effortlessly. No complications with clearance difficulties, or wire routing. The reason that I gave it 4 eggs is that the power light won't come on. Not a huge deal taking into consideration every little thing that went into it, but it would have been good. The 3 fans that came with it are operating whisper quiet, so no problems there. If anything else adjustments, I'll post asap.

Comment:
I used this case as an upgrade for a medium-priced construct. I found it to be sturdy and the included fans were a nice bonus. The front case fan connection was alittle brief but I managed Obtain this case...Rapid delivery often from Newegg!!!

Comment:
Cost is great! Plenty of room, this case is a excellent size for a mid tower. It has plenty of fans, there had been actually much more fins in this case than my board would power...It is a fairly uncomplicated setup so it only takes a few minutes to set up entirely The bottom mounted power-supply is a enormous plus. The case is steel, but the expansion ports are stamped aluminum. This means you have to break them out of the case to use them. I tried to do this as carefully as possible but it nonetheless bent the mounting brackets for the card so it does not fit perfectly. They do not give you enough screws for this program, I had to go to ideal get and get much more...The pieces they give you to seat the challenging drive do not fit all models so if you are unlucky enough to have one (Like I do) you just have to discover a way to make it work.

Comment:
Nice simple layout and construction. Removable HDD cage with fan mounted in front of it. Lots of airflow on a spending budget, with space for 2 120mm units on best, 120mm intake and 120mm exhaust plus the mesh side panel. Clean, straightforward functional styling with a appear that belies it's price tag. No sharp edges to gouge you in the course of your construct. Thin steel that amplifies your fan noise and somewhat cheesy backplane and card retention mechanism. Included fans aren't exactly going to blow you away, and you'll want to add far more to get the most out of this case. This is a reasonable option to the incredibly similar Rosewill circumstances in the same price range (Destroyer, Challenger, etc.). Any of them or this unit would be a good spending budget gamer-oriented case, but this HEC unit possibly has the finest styling of the lot. In addition, this is a great case for budding modders that want to hone their skills, given that you can acquire two or three for the cost of one of the high-finish options, and it's practically a blank slate for you to work with.

Comment:
Fantastic looking Case. Fairly excellent price.I would get once more.cost keeps dropping each week. 1) Fingerprint magnettwo) This case is like getting your window opened with the screen down. Never ever saw substantially open and probably useless space, mesh. Guess you can add a number of fans, but the case breaths so much it is not necessary,3) Those dust filters will in all probability be disgusting in a few months.4) The on/off switch is flimsyfive) My greatest hate in the case are the side panels which do not have speedy release bolts. You need to have to screw and unscrew to get off/on. a) Weird placement for motherboard, you only get two mounting pins bu there are little mounds with holes to tighten the motherboard in three other locations.b) Ws strange that the front mounted 2 USB's (şž) only have 1 cord for both so guess it is a plus, you can have an additional USB added later on.c) Lastly it is a bottom mount energy supply case - make certain you acquire the right PS.

Comment:
Looks truly nice. Has two fans 1 on very leading and 1 that is 120 blue led on bottom. Fans aren't too loud but can be heard. I have a 9600 GT that doesn't have fan control in the case so its louder than hell. You can see the blue led from the side front .. really should have some padding of some sort to stop light escaping or case need to have been sealed superior by snaps on front.

Comment:
Can't think the offers i get from newegg. I have built a dozen antec cases and this comes quite close, and in some techniques better with halve the price. No added screws, and the screws it comes with feel kinda inexpensive... but they're just screws. These instances help a ton for cooler operation when you load them up with all the fan options.

Comment:
looks nice, keep every thing cool, and lots of space must incorporate 1 a lot more fan

Comment:
fit a atx mb fine , comes with filters for fans and energy supplie. It's alot larger that what it looks like in the picture. Need to have three pin fan to molex connector for the fans, search fan splitter and get the rosewill splitter that can control fan speed from mb with cpu fan too. cheap gonna have to obtain a new desk for this to fit in.

Comment:
Looks great / a lot of room for "my" hardware / good value for the price Not a tool-less case I'll possibly get a kit to fix this.

Comment:
Solid case for the price. took 1 star off since the ps was to far away for me to install the 4 pin 12v on the mobo. i know i purchased to major a case for the mobo and that's my fault but now everything is finding 1 star off from that order. i get alot of low end instances and this is the very best one i located so far

Comment:
Nicely ventilated. Plenty of locations for fans, bottom mounted PSU with clearance for bottom air intake. Fits a 6970 with ease. You can access the cpu backplate without having removing the motherboard. Front panel and HDD cage are simply removed. eSATA on front panel. Not toolless. Pretty thin steel (but feels sturdy sufficient). Only room for 3 HDD with out extra HDD cage. Is worth the อ.99 I paid and then some. Easy access to every thing and quite slick seeking (pictures don't do it justice, looks incredibly Antec-ish in individual). Would purchase once again.

Comment:
Lots of ventilation. Effortless to function with. Looks good. Truly can't beat the cost. The front panel seems to be a softer plastic then most others preventing it from cracking so rapidly. It's not totally screwless as the description implies. I would have like the 3.5 drive bay adapter to hold 4 drives instead of three. Worth the income.

Comment:
It's the bomb-diggity. Big case. Comes with two fans already in what some look at the ideal air flow setup. And has mesh/foam to catch dust. For men and women who like lights, it has blue lights on the power button and for the front fan, but not the best fan for some reason. :( None that I've seen. Good case for the value. Very best 1 on Newegg for this price, seriously.

Comment:
Cost, design gives plenty of room. Good cooling First case was tweaked so poor that the MB plate would not seat into the cage opening. The case is very light/ flimsy and will not with stand much. NewEgg was excellent and RMA was a snap. Second case came in ok, installed a Micro ATX in it and found that the card slots on the case did not align up with the slots of the Micro MB even though this case is created to manage Micro. Wish they would have left some room on the back tray side of the case to run cables, has a lot of cut outs to pull cable through but the space between the back plate and the cover will only enable thin cables, you will not be able to run any thicker power cables on the back side