LIAN LI Lancool PC-K7B Black Computer Case

Comment:
-Aluminum Finish-Sturdy-Incredible cable management-Effortlessly removable HDDs made doable by rubber extensions-Can dissemble the entire case if require be - HDD bay can be a bit of a hassle to take away. I never ever had to take away it even though Amazingly affordable for the good quality you get. It has every thing you would anticipate from a 200$ full tower case, but at a a great deal less expensive cost and nevertheless very good quality elements.

Comment:
Let's see, there's a ton. In no certain order:Removable mobo tray, removable dust filters by the intake fans, rotatable challenging-drive rack, and Strong create high quality. Also, do not underestimate the comfort of possessing the usb/headphone/audio jacks on Leading of the case as an alternative of at the bottom. It's come in handy repeatedly and I haven't even owned the case a month however. Honestly I try to assume of a con for any critique that I write, anywhere but I'm having a difficult time on this 1. Possibly the blue power light is as well bright? That's kind of a reach. Wow. Coming from a cheap Raidmax case I wasn't positive how substantially difference a case could seriously make. Based on their wonderful reputation I figured that if any case would actually make a distinction a Lian Li a single would. I was definitely ideal on that 1. I had no challenge with cabling or anything, you can hide them behind the mobo tray very very easily. No problem with the feeds from the top rated ports for usb/audio reaching their location on the mobo ( ASUS M4A79XTD).Every thing got right here in two days, thanks newegg!

Comment:
Purchased this for my wife(with her ok, of course) and she likes it. Extremely lightweight, fantastic airflow, very good adequate cable management with the usual sleek Lian-li lines. Not a lot of room behind motherboard for cable management but doable.

Comment:
Basic, but stylish. Absolutely nothing exotic, just 3 120mm fans and its cooling overall performance is great. No side fans or leading fans where noise can escape by means of from the inside of the machine. Made for a really quiet develop for an above mid range gaming machine although becoming able to expel the heat from the SLI setup. Incredibly easy to function in. The removable motherboard tray is an exceptional plus. HDD cage is reversable, as effectively comes with rubber mounts for the HDDs to be mounted in the cage. Removable front panel enables for uncomplicated access to the fan filters for quick cleaning. Energy and reset buttons are strong feeling, and the LEDs for energy and HDD are just correct. Not annoying at all. Overall a fantastic situation for individuals who prefer some thing that performs nicely, is capable of getting close to silent, and isnt flashy or sticks out. Only one particular issue I actually found that bothered me. With my motherboard the CPU socket is close to the PSU, and it made it challenging to fit my CPU heatsink. Those with motherboards where the socket is "up high" on the board, and want to run huge heatsinks, really should beware there may not be adequate area.

Comment:
Keeps 955 AMD cool, looks pretty. Wiring wants further length for energy/reset buttons.HD mounting is a discomfort in the egg if you use SSD.

Comment:
Really quiet and cool case. 3x 120mm fans. Power and hdd activity lights are quite subdued and the whole case is incredibly clean with no frills and blends very properly with my cherry wood armoir which homes my process. Cleanable front filter to keep the dust out of the program. Removable board tray and rubber mounted tough disk trays mounted in easy to intall/remove location. No USB 3. I had always bought cheap circumstances in the previous, granted this isn't the most costly, but this one has altered my believed approach. I enjoy that my components are easy to test and alter and the method is cool and incredibly quiet. Good addition with the cleanable filter. I hate when dust builds up so a lot inside, this filter ought to cut that dust down to a minimum. Bottom line this case is great for its cost point.

Comment:
Superb cable managementPower provide up top ratedVery good case fansOutstanding hard drive mountingRemovable motherboard trayComes with plenty of screws Buttons on top rated faceI/O on top faceBright indicator LEDsFingerprint magnet(not major troubles) My final case was horrible so I decided to treat myself and I am happy I did.Possessing the power provide on the bottom made my cables stretch about components since the motherboard was made for the PSU to be on leading.This case's sides and front come off with no fuss.You can wire cables behind the motherboard tray in a few places.I employed a single of the front fans for a push/pull setup on my heat sink.I placed an index card in in between the bare LED and the front cover which dimmed the brightness just appropriate.The metal side covers are quite thin, which may well help transfer heat, but also tends to make me nervous though moving the case.

Comment:
Case style is intuitive for a new construct as I am a initially-time builder and discovered it self-explanatory. The air circulation is superior to any huge name cookie-cutter computers I've owned in the previous and the fan noise is far less than other computer systems I've heard -- which means noticeably low. All elements and wire-routing went in smoothly. Installed 2x640GB Black Caviar SATA drives with Gigabyte Micro ATX, OCZ 500W modular PSU, Rosewill cooler, 4GB G.Ability and ATI Radeon Card as well as a card reader and Lite-on Lightscribe DVD drive -- it all began initial try. The computer buttons seemed built for the motherboard and BIOS instructions. Access to the leading USB panel is excellent for thumb drives and, yes, the small metal door covering the USB and headphone port is spring-loaded, so it sits tight when closed or open. It is a Extremely quiet laptop or computer, particularly with all of the cables pinned down by the attached cable guides. The rear panel is even vented for extra airflow. Chip is at 28 degrees. None

Comment:
It's fantastic. Most of the reviews say it all. Yes the front fans are difficult to replace but a uncomplicated Phillips screwdriver is all you need to have (I added LED Fans).If you want a windowed side panel the Lian-Li W-65BT will fit perfectly. I bought it on sale so I can't even complain about value. Kudos to Bill Owen for posting about the sale cost! I like the top mounted PSU design since a lot of PSUs just don't have cables lengthy sufficient to reach the P4 connector on motherboards. I just locate it simpler to "dress" the cables on a major-mounted PSU design. Very simple to hide all cables for a tidy installation and the "clamps" on the left (hidden) side of the chassis preserve your wiring neat as nicely.

Comment:
Solidly built, stylish but not too flashy. Simple to install the motherboard. Front screen air filter is a plus. Fantastic airflow even with the screen. Have to get rid of HDD rack to use 2 of the HDD spaces (fans block installation of 2 HDD spots). Do not look directly at the blue LED energy light, for it is brighter than the sun. Superb button action when turning the personal computer on. Fans included with the case are average in terms of noise.

Comment:
Enormous case with lots of choices. Pull out motherboard tray, channels for cabling, and a rotating HDD attempt were all very great. Cools itself extremely nicely, didn't genuinely want to worry about anything there. LED and external USB wiring was reversed from the usual, but not a huge deal. Just a wonderful case for the money.

Comment:
Solid construction, incorporates all mounting hardware you may possibly want, properly designed, great value, excellent air flow, great for those not going balls-out on lights and windows. External corners are somewhat sharp - not for bleeders. May lead to jealousy in inferior circumstances. This is my initial actual quality case, and since it was on sale it was an outstanding worth for the cost. Some reviewers state that the inside is sharp, which may possibly be true, but I was cautious when operating in it and didn't have any problems. However, the outdoors is just as sharp at the corners - this case is a bit larger than my old Dell mid-tower and juts out a tiny under my desk; I have to be careful not to slice my knees open when turning about in my chair.I wouldn't say this case was noisy, but you can discover the fan noise in a quiet space. I don't assume that is a function of this case; if you are going to run that many fans you will have to place up with some noise. I only mention it due to the fact my final case had far fewer fans and I can discover the distinction. This is a excellent case and from now on I will pony up a little additional to get a fantastic case in my future builds. Getting worked with less costly cases I seriously appreciate the tiny issues that this case has to offer you.

Comment:
I decided to go the slightly more high priced route and acquire a Lian Li case, due to the higher regard that reviewers seemed to have for this the construct excellent of this company's goods. And, this is indeed a good quality case. My foremost purpose for this distinct model was the free shipping being provided at my time of purchase, whilst practically all other Lian Li situations needed a ~ฤ S&H fee.The reality that this case (and apparently all Lian Li situations) comes with 2 intake and 1 exhaust, 12 cm, ball-bearing fans saved me ů * three for a comparable Rosewill fan I was thinking of (plus S&H). In addition, the brushed aluminum looks great and tends to make for a significantly lighter case than my steel-produced Antec Sonata. There are a couple of annoyances that collectively warrant docking a star. The rubber grommets supplied for the "tool-totally free" HDD installation are like cruel jokes. Not only does it take a seemingly inordinate amount of time to screw all 4 of them in (times the number of tricky drives), but various instances, although attempting to insert a drive into its bay, I seasoned the darn factors squeezing off! (This may possibly be the only edge my old Antec Sonata had more than this case: the Sonata capabilities rubber grommets that are attached to the drive bays, so you don't have to fool with screwing them onto the drives themselves!)Furthermore, the motherboard tray positions the motherboard such that it virtually does not allow the PCI cards to line up to the PCI slots in the back; this initially prevented my WiFi card from becoming detected. On the other hand, with a tiny bit of force I was capable to get that sucker connected, and I haven't had any issues (within weeks of installation) of it becoming loose yet CAVEAT EMPTOR: If you personal a PSU with cables that run out the bottom (as several modular PSUs are), then this case will be incompatible! The PSU cage will obstruct these PSUs' cables--I had to get a new PSU just to fit this case, and I already had a incredibly nice one!All in all, and regardless of the unforeseen PSU expense (that I need to have anticipated following viewing the photos on Newegg of this item), this is a wonderful case. It's solid, looks incredibly good, and is (mostly) incredibly well made. No plastic parts (where it matters, that is)!

Comment:
Monolithic style and black brushed aluminum is incredibly sharp. Good potential for air flow. Nicely placed cable management cutouts. Not flashy in the slightest. The Switch/LED wires are almost as well brief to reach the motherboard. You can't even route them by means of the clips they are intended to be routed via let alone try to tuck them out of sight. Specific hardware is tiny and could simply be stripped if you aren't conscious of what you're doing. Motherboard standoffs are fine pitch thread and are place in the very same bag as flanged coarse thread screws (I ruined one particular standoff assuming they went with each other).The included 120mm fans are affordable 1000rpm sleeve bearing units which will will need to be replaced in 10 months. How lengthy will it take the difficult drive isolators to dry-rot? I like my Cooler Master RC-690 a tiny far better, but aesthetically this Lancool is considerably more apporpriate for my father's new rig.

Comment:
The case is incredibly sturdy. No problems with sharp edges as others have commented. It has metal cord holder brackets on the back of the motherboard tray. It's handy to have the power button on leading of the unit as well as a couple of USB ports there as properly. The dimensions had been not defined nicely as to the height vs. depth of the dimensions. The dimensions had been listed but the size did not define if the height was the earlier number or the later number. (The width is apparent and didn't want to be far better taged to the dimension size.) The case is 17.50 inches tall and 19.25 inches from front to back. (It doesn't fit as effectively into my laptop or computer desk due to the fact I was thinking the 17.50" was the front to back dimension but was mistaken.) The case isn't meant to move about alot considering that it is relatively heavy. The instruction sheet was somewhat light on directions particularly as to securing the motherboard to the motherboard tray. (This was my 1st make.)

Comment:
The filters on this situation work excellent to catch dog hair and dust. If you have pets in the residence or if you live in a dusty environment, this is a situation like no other individuals you will come across on the marketplace. Uncomplicated to take the front panel off to get to the filters and uncomplicated to take them out to clean them. The filters retain the case seriously clean. Good cooling case with correct fans, Classic excellent looks, uncomplicated to work with. A lot of space to have very organized cable management with the 750Watt Octopus like power supply I have. the fans that come with it don't move adequate air. (I invested in 3 larger RPM fans from NewEgg of course). This is an Awesome Case!!!!!!!! I'm gonna acquire a different a single just to have on hand-it is that good of a situation.New Egg, could you stock some replacement filters for this case just in case some of us could need them in the future?

Comment:
* Very good construction* Extremely quiet ( 3x 120mm low RPM )* Good air pressure* Washable air filters ( no screws needed )* Excellent cooling* Anti-vibration for HDs.* Some cable management None I can feel of. May possibly be a bit on the substantial side for some...Mine has survived a bad fall and roll with only minor cosmetic harm.

Comment:
Basic yet sharp searching design and style.Not glossy!Situation fan filters work well. A lot of airflowFantastic cable management.Re-moveable motherboard tray. I can't find a location to put my "Powered by Corsair" sticker that will make the case nevertheless look very good.The blue energy light is a tiny to bright for my tastes I really like the situation. Almost everything was straightforward to install into it. the cable management clip points are a little overstuffed (I should have gotten a modular power provide) but its fine. Anytime a person looks at this factor they generally inform me how cool and stealthy the style looks, which is what I wanted.I never liked these what I say more than the prime show offy cases with the alienware esk design and style and all the LEDS. and windows. (though I have been pondering of getting a window for this)

Comment:
great finish, lots of area, removable MoBo tray, very good cable management. assembly instruction booklet extremely vague, esp. to inexperienced builder(such as myself). Wires of LED indicator lights polarity reversed Nothing at all fancy just a great situation, rather 120mm fans

Comment:
* Light* Primarily well machined (The aluminum is perfectly brushed and all component appears to be of high high quality regardless of the cost) (See cons)* Largely uncomplicated to work in (cable management and removable motherboard tray enable a lot) (See cons)* Decent Stock Airflow (Received impressive scores in benchmarks)* Removable Motherboard Tray (makes it much less complicated to connect the motherboard and modify NB fan) (also see cons)* Damping for HDDs (helps lessen vibration from the HDD, does a decent job)* Good Pressure (give and take on this one. Assists maintain dust out, helps prevent air from getting recycled into the video card.)* Ridiculously simple to eliminate the front panel* Dust filters on the front (in mixture with positive pressure) assists to hold the internals spotless. * Not 100% Aluminum. Although this decision kept expense down. Steel in case keeps it mostly sturdy, but it will twist if you try to pick it up from the corners.* I had an issue with the rear I/O not being able to specifically match up with the shield plate. It was off by about a millimeter which needed a flat head screw driver and an uncomfortable amount of force to push it by means of the holes in the shield plate.* The removable motherboard tray was a good touch, however it need to be noted that larger coolers will not fit back in considering that the tray has to be tilted back in (as opposed to sliding in straight from the back).* There isn't significantly space behind the motherboard tray to route cables. If you don't have a modular PSU, this may possibly be frustrating.* A tad bit loud due to the .8mm Aluminum and stock fans. There's a fair amount of vibration coming from the doors as effectively.* The top 5.25" bay is blocked by the front I/O port's cables. It may possibly still be handy for a fan controller, even though. In all, this situation is effectively constructed, and I would undoubtedly advocate it to anybody looking for an all metal case on a budget. There are other chassis that could have greater airflow or attributes. But, they will undoubtedly be made of flimsy plastic components (see the Antec P180). I purchased this case for my girlfriend for her initial gaming Pc. I also bought a Lian-Li B25F to replace my deteriorating P180 which I'll receive shortly. Stay tuned for that evaluation!

Comment:
Bought this situation as an upgrade from a second hand plastic case for my server, and wow. Its just.. so great. The Lian-Li Metal Bon'd instances are seriously awesome. Has 2 large fans in the front which blow air across your challenging drives (I have 4 in there, three are in raid and they all remain chilly to the touch.) Its quiet and rock solid. Removable motherboard deck, which was good, could hide the extra energy provide cables back there.Also appreciated the dust filters on the two front fans. The IO Panel cables had been a tiny bit short for my Foxconn P45A-S motherboard, but they did reach to the bottom rear corner when stretched across the front. its also finger-printy. Incredibly finger-printy. This is a constructive airflow case, 2 fans in + power provide fan, and 1 out + rear vents.

Comment:
- Very solid build high quality - Very clean black box, nothing at all fancy and stupid hunting - Low-cost for a actual quality aluminum situation - Air filters and 2x 120mm intake fans - 4x 120mm fans included- 2x USB, IEEE1394 and mic and headphone inputs It's a minor problem, but the external thumbscrews are M3 as an alternative of 6-32, so the thumbscrews it comes with won't help you with other systems.There difficult drive mounting program is simple and sophisticated, but you'd much better not loose the hardware that the case comes with, due to the fact you're not going to have an effortless time acquiring those tiny washers and spaced screws aftermarket. This case comes in a funny box that exclaims that it is "METAL B0NED"... pretty silly. Also this situation is branded Lancool, not Lian-Li. FYI.on an additional interesting note, NewEgg evidently considers the word "b0ned" to be inappropriate, hence the l33t spelling...I've built 8 computers based on this case, and I really like operating inside them. The power light is blue and the HDD activity light is red.

Comment:
Light-weight, no sharp edges, good style: removable motherboard tray, screwless drives, etc. Not as sound proof as some thicker cases, but the light-weight is the trade off. Built a lengthy lasting desktop machine with Asus motherboard and AMD processor.

Comment:
A clean look, all black. Quiet fans, good layout for my X58 technique. Tricky drive mounting system is genuinely nice. Buttons and USB/Audio panel on top. Vibrant blue power led is undesirable for a bedroom, you know if you are going to leave this point on to download or a thing. The brightness of the led is some thing on the level of a neutron star or quasar, I can see it when I close my eyes and when I'm at function ten miles away. Oh and this case isn't all aluminum just the cover panels. Not sure if the frame is steel for strength or to increase Lian-Li's profit margins.

Comment:
This case has OK Wire management, great size, and appropriate for a lot of applications. Enjoy positioning of Power Button/Reset Button/USB/FireWire/Audio Could not do all 4 screws in Corsair PSU. No hiding SATA power cables/molex cables behind M/B tray. Wire Management clips are flimsy.